Silver Flute W20RC38-08 with Pyle PDS442 + Dayton H07E
Silver Flute W20RC38-08 with Pyle PDS442+Dayton H07E This is my third attempt at trying to mate an 8″ woofer with the Pyle PDS442+Dayton H07E combo. In this instance, I’m using… Read more >
Silver Flute W20RC38-08 with Pyle PDS442+Dayton H07E This is my third attempt at trying to mate an 8″ woofer with the Pyle PDS442+Dayton H07E combo. In this instance, I’m using… Read more >
Dayton DA270-8 Raw Frequency Response Sealed Box=52 liters. Baffle Width=16″ Mic at 36ins, Woofer axis. Impulse Window=5ms. No Smoothing. Nearfield below 600Hz. Thiele & Small Parameters Thiele & Small Parameters (before… Read more >
Dayton PA200-8 with Pyle PDS442+Dayton H07E In this exercise, I want to see how well the Dayton PA200-8 woofer integrates with the Pyle PDS442+Dayton H07E horn. The PA200-8 is loaded… Read more >
MCM 55-2960 with Pyle PDS442+Dayton H07E This is my second test with the MCM 55-2960. This time round, I’m using a budget Pyle PDS442 compression driver coupled to a Dayton… Read more >
PRV Audio D280Ti Specifications: • 1″ exit Titanium Diaphragm • Mounting type: 1-3/8″ 18 TPI • Frequency Response: 1,300Hz-20kHz • Sensitivity: 109dB @ 2.83V/1M • Impedance: 8Ω • Weight: 3.31… Read more >
Pyle PDS221 Specifications: • 1″ exit Titanium Diaphragm • Mounting type: 1-3/8″ 18 TPI • Frequency Response: 800Hz-20kHz • Sensitivity: 102dB @ 1W/1M • Impedance: 8Ω • Magnet Structure: 20oz… Read more >
Pyle PDS382 Specifications: • 1″ exit Titanium Diaphragm • Mounting type: 1-3/8″ 18 TPI • Frequency Response: 1.0kHz-20kHz • Sensitivity: 104dB @ 1W/1M • Impedance: 8Ω • Neodymium Magnet Structure:… Read more >
Pyle PDS182 Specifications: • 1″ exit Titanium Diaphragm • Mounting type: 1-3/8″ 18 TPI • Frequency Response: 1.5kHz-20kHz • Sensitivity: 103dB @ 1W/1M • Impedance: 8Ω • Neodymium Magnet Structure:… Read more >
Peavey RX14 Specifications: • 1″ exit Titanium Diaphragm • Mounting type: 1-3/8″ 18 TPI • Frequency Response: 1.5kHz-20kHz • Sensitivity: 104dB @ 1W/1M • Impedance: 8Ω • Ferrofluid Cooling •… Read more >
Dayton D250P-8 Specifications: • 1″ exit Polyimide Diaphragm • Mounting type: 2/3 Bolt M6 • Frequency Response: 1,000Hz-20,000Hz • Sensitivity: 104dB @ 1W/1M • Impedance: 8Ω • Weight: 4.5 lbs •… Read more >