Dayton H812 (100×60) Horn with Selenium D220Ti
Dayton H812 Specifications: • Horn type: Exponential • Minimum frequency: 800 Hz • Nominal dispersion: 100° H x 60° V • Throat diameter: 1.0″ • Mounting type: 2-Bolt • Dimensions:… Read more >
Dayton H812 Specifications: • Horn type: Exponential • Minimum frequency: 800 Hz • Nominal dispersion: 100° H x 60° V • Throat diameter: 1.0″ • Mounting type: 2-Bolt • Dimensions:… Read more >
Dayton Audio H07E Specifications: • Horn type: Elliptical Waveguide • Minimum frequency: 2,200 Hz • Nominal dispersion: 80° H x 50° V • Throat diameter: 1.0″ • Mounting type: 1-3/8″-18… Read more >
Selenium HC23-25 Specifications: • Horn type: Exponential • Minimum frequency: 600 Hz • Nominal dispersion: 100° H x 40° V • Throat diameter: 1.0″ • Mounting type: 1-3/8″-18 TPI •… Read more >
Selenium HC23-25 Specifications: • Horn type: Exponential • Minimum frequency: 600 Hz • Nominal dispersion: 100° H x 40° V • Throat diameter: 1.0″ • Mounting type: 1-3/8″-18 TPI •… Read more >
Selenium HC23-25 Specifications: • Horn type: Exponential • Minimum frequency: 600 Hz • Nominal dispersion: 100° H x 40° V • Throat diameter: 1.0″ • Mounting type: 1-3/8″-18 TPI •… Read more >
Pyle PH612 (90×40) Waveguide + Pyle PDS382 Frequency Response with various filters
SEOS-12 Waveguide (Super Elliptical Oblate Spheroid) RAW (no smoothing) Frequency Response with Selenium D220TiExpanded view from 500Hz ~ 20kHz
B&C ME10 Hyperbolic Cosine Horn 90°H x60°V RAW Frequency Response with Selenium D220Ti, Dayton D250P and Pyle PDB512 The B&C ME-10 is a small horn measuring 5.1″x5.1″ only. Due to… Read more >
Pyle PDS182 compression driver Fig 1 shows the different responses of the PDS182 with the PH565 horn. BLACK trace = RAW (no crossover, no CDEQ) RED trace = electronic crossover… Read more >
While the PRV D280Ti compression driver works well with the PH565 horn, I am still not completely satisfied with the flatness of the response. This time, I screwed on a… Read more >