Pyle PH565 horn + Selenium D220Ti
The Pyle PH565 horn measures 7-5/8″W x 6-1/8″H, making it an ideal candidate for 8″ woofer. It has a coverage of 90°H x 40°V, a cut-off frequency of 1kHz, 1-3/8″-18… Read more >
FaitalPRO STH100 horn + Radian 450PB
Radian 450PB with STH100 horn In this next test, I’ve been waiting to see how well my favorite compression driver, a Radian 450PB, fares with the FaitalPRO STH100. Fig 1… Read more >
Pyle PH612 horn + Selenium D220Ti
The Pyle PH612 and the Dayton H6512 are clones of the JBL 338800-001 waveguide found in their JRX Series loudspeakers. It was popularized by Zilch in his EconoWave Speaker project… Read more >
Pyle PH810 horn + PRV Audio D280Ti
Here is another horn that looks good with 8″~12″ woofers. The Pyle PH810 measures approximately 10″ W x 8″ H and has a coverage of 90° H x 40° V…. Read more >
Dayton Audio H07E + PRV Audio D280Ti
The Dayton Audio H07E is one of my favorite horns. To be more precise, it’s a specialized type of horn known as a Waveguide. The difference between a horn and… Read more >
Selenium HC23-25 horn + Pyle PDB512
Matching Horns to Compression Drivers With third party horns and compression drivers, it’s often a hit and miss affair with regards to compatibility. Fig 1 shows three screw mount compression… Read more >
FaitalPRO STH100 horn + Selenium D220Ti
The FaitalPRO STH100 aluminum horn throat is an elliptical, tractrix design. It has a coverage angle of 80° x 70° and best of all, measures only 7″ wide and 4.7″… Read more >
Dayton H812 horn + Selenium D220Ti
Dayton H812 with Selenium D220Ti Having tested out the Dayton D250P Polyimide compression driver before this, it’s time for the Dayton H812 to meet the selenium D220Ti titanium driver…. Read more >
Dayton Audio D250P Polyimide Compression Driver Review
Dayton Audio D250P With more than ten compression drivers in my collection, I have more than enough to play with. But the majority of them are with Titanium diaphragms with… Read more >
PRV Audio D280Ti with Dayton H07E
Dayton Audio H07E The HE07E is a compact 6″x6″ Elliptical Waveguide with a coverage of 80° (H) x 50° (V). Minimum Crossover is 2,200Hz. Standard screw mount 1-3/8″ x 18… Read more >